Description
Car Builders Stage 1 Sound Deadener is a vibration (sound) dampening mat. It consists of a butyl rubber noise absorption layer combined with an aluminum top layer.
Each box has 12 sheets, each sheet is 300x500mm and 2-2.2mm thick.
Our butyl-based Sound Deadener does not require heating, does not smell, will not go brittle over time - which are all qualities of old-style tar or bitumen sound-deadening materials.
Our Sound Deadener does not run the risk of coming unstuck as there is no adhesive layer to fail - our pressure-sensitive butyl rubber is sticky by itself.
Features/Advantages
- Easy installation - just peel off the release liner and roll it on
- 100% waterproof - does not rot or deteriorate
- Cuts with scissors or a knife
- Reduces heat transfer
- Conforms and fuses easily to all types of sheet metal
Applications
- Under carpets
- Roof skins
- Inside cavities
- 1/4 panels
- Doors
- Boots/trunks
- Firewalls
Specifications
- Appearance: Black Butyl-based core with silvery aluminum reinforced layer backed with white wax paper release liner.
- Thickness: 2.0 - 2.2mm
- Weight:3.2kg/p sm
- Acoustic Loss Factor: (ASTM method E756 @ 200Hz, Temperature range -10°C to +60°C), 0.08 to 0.41
- Recommended Install Temperature: -10°C to +60°C
- Resistance Temperature Range: -40°C to +149°C
- Chemical Resistance: Resistant to water and mineral oils
- Adhesive Peel Strength: 65N/cm on cold steel
- Storage: The product should be stored at room temperature for best application and should be stored horizontally in its package.