Description
- Highly efficient 3W LED technology
- 5000K LED colour temperature and 80CRI maximize sharpness and definition
- Vacuum-metallised optics deliver wide spread of light
- Reduced up/down spread of light suits even low mounting positions, or roof mounting
- Sleek, low profile design eases installation
- Aero design virtually eliminates wind noise on roof installations
- Includes low profile side mounting brackets (anti-theft solutions included on Linear-36/42/48)
- Electronic thermal management system optimizes light output to preserve the longevity of the LEDs
- Anodised pre-treatment and automotive-grade powder top-coat for ultimate corrosion and chemical protection
- CAE optimized heatsink offers improved thermal dynamics
- Overvoltage protected
- Reverse polarity protected
- ‘Unbreakable’ polycarbonate lens with hardcoat lacquer
- UNECE approved Reg 112 (Class B Driving Light) for on-road high beam function
- UNECE approved Reg 10
- IP67 watertight
- Supplied with pre-wired male/female 2-pin Superseal connectors
Technical Specifications
Voltage Range (DC) | 10-32V |
LED Life | 50,000 hours |
Weight | 495 gr |
HIGH BEAM FUNCTION | |
Total Luminous Flux | 2250 Lm |
Total Driver 'FOV' Flux † | 1602 Lm |
Colour Temperature | 5000K |
Number of High Output LEDs | 6 |
Power Consumption | 21 Watts |
Current Draw (at 14.4V) | 1.5 Amps |
Start-up Time * | 100ms |
CERTIFICATION | |
High Beam | ECE R112 |
ECE Reference | 12.5 |
DIMENSIONS | |
Width | 232 mm |
Depth | 62 mm |
Height | 40 mm |
PHOTOMETRIC DATA | |
Horizontal Beam Angle | 34 degrees |
0.25 lx Line | 494 metres |
0.5 lx Line | 349 metres |
1 lx Line | 247 metres |
3 lx Line | 143 metres |
* 'Start-up time' is the delay between the lamp receiving voltage, and light being emitted. Different Lazer lamps have different start-up times, depending on their electrical architecture, so we recommend that if you are buying two different types of Lazer lamp, for mounting onto the same vehicle, that you ensure you pick products with matching start-up time (either 5ms or 100ms, depending on the product). Please check the lamps technical section on each product page to be sure you are purchasing lights with the same start-up time for the best performance.
† Driver FOV flux is a measure of effective lumens taking consideration of the amount of light in a driver's 'field-of-view' defined as an area +/- 45o left/right, and +/- 10o up/down.